browse Matrice 300 RTK products

Showing all 12 results

  • DJI Smart Controller Enterprise

    1170

    The DJI Smart Controller Enterprise comes with an ultra-bright 5.5-inch 1080p display that maintains clear visibility even in direct sunlight.

  • Matrice 300 Series TB60 Intelligent Flight Battery

    850
    Overview

    The TB60 intelligent flight battery has a capacity of 5,935 mAh. It supports the hot-swap function allowing to change the battery without powering off the drone, which saves time and ensures smooth flight operation during critical tasks. The battery allows Matrice 300 RTK to fly 55 minutes without load. Visit DJI’s official website for details.

    Tips

    Never use damaged, leaking or swollen batteries. In any of these cases, contact DJI or designated dealers.

    In The Box

    Smart flight battery x 1

    Specifications

    Capacity: 5,935 mAh

    Weight: ~1.35 kg

    Voltage: 52.8 V

    Operating Temperature: -20 ~ 50°C (-68 ~ 122°F)

    Compatibility

    Matrice 300 RTK

  • Matrice 300 Series Dual Gimbal Connector

    235
    Overview

    Used to mount your loads to the bottom of Matrice 300 RTK, the dual gimbal assembly has a waterproof grade of IP44 (with waterproof loads as defined in IEC 60529 only).

    Tips

    For the safety of the drone, it is recommended to turn off the drone and remove the intelligent flight battery before replacement.

    In The Box

    Dual gimbal assembly × 1

    Backup absorber ball × 8

    Repair toolkit

    Compatibility

    Matrice 300 RTK

  • Matrice 300 RTK OSDK Expansion Module

    210
    Overview

    The OSDK expansion module can attach a Manifold 2 onto the Matrice 300 RTK platform, and offers standard adapter interfaces to allow connection with various onboard computing platforms.

    Highlights

    Compatible with the M300 RTK and Manifold 2.

    Converts interfaces on the M300 RTK OSDK to standard interfaces such as USB Type-A, UART serial port and XT30 power output, to allow for connection with onboard computing platforms.

    Can be used with the single upward gimbal to meet the needs of more scenarios.

    When mounted onto the M300 RTK, the module can be put into the safety transport case while attached to the drone, ensuring easier storage.

    Tips

    This module converts the M300 RTK OSDK interfaces to standard interfaces such as USB Type-A, UART serial ports and XT30 power plugs, to allow connection with onboard computing platforms. The module is not designed with dust-proof or water-proof capabilities.

    Please assemble according to the instructions in he User Manual before use. Fore more information, please visit https://developer.dji.com.

    In The Box

    Bracket A (upper) x 2

    Bracket B (left) x 1

    Bracket C (right) x 1

    Bracket D (reinforcing rib) x 3

    Bracket connection block x 4

    OSDK adapter plate module x 1

    USB cable (with two type-A ports) x 1

    XT30 power cable x 1

    Wire clip x 3

    Foot pad x 3

    Hand screw x 5

    Screw A (M1.6) x 15

    Screw B (M2.0) x 5

    Screw C (M3.0) x 5

    Screw D (M1.6 step) x 3

    Screwdriver kit x 1

    Specifications

    As-assembled size: 200 x 120 x 40 mm

    Compatibility

    Matrice M300 RTK

    Manifold 2

  • Matrice 300 Series Upward Gimbal Connector

    200
    Overview

    Used to mount your loads to the top of Matrice 300 RTK, the top gimbal assembly has a waterproof grade of IP44 (with waterproof loads as defined in IEC 60529 only).

    Tips

    For the safety of the drone, it is recommended to turn off the drone and remove the intelligent flight battery before replacement.

    In The Box

    Top gimbal assembly × 1

    Backup absorber ball × 4

    Compatibility

    Matrice 300 RTK

  • MATRICE 300 RTK DJI SMART CONTROLLER (ENTERPRISE) MONITOR MOUNTING KIT

    123
    Overview

    The monitor mounting kit can be mounted on DJI Smart Controller Enterprise to carry mobile devices.

    In The Box

    Professional monitor mounting kit × 1

    Mobile device holder × 1

    Slotted screwdriver × 1

    Hex socket screwdriver × 1

    Screw × 8

    Specifications

    Holding Range of Mobile Device Holder: 93-167 mm

    Compatibility

    Matrice 300 RTK

  • Matrice 300 Series 2110 Propeller

    115
    Overview

    Genuine propellers standards for Matrice 300 RTK drones

    Tips

    It is recommended to change a propeller only in emergency in outdoor scenarios. Propellers are thin. Operate with caution to prevent scratches.

    In The Box

    CCW propeller × 1

    CW propeller × 1

    Screw × 6

    Specifications

    Propeller Diameter: 21 inches

    Pitch: 10 inches

    Compatibility

    Matrice 300 RTK

  • Matrice 300 Series 2195 High Altitude Low Noise Propeller

    88
    Overview

    The 2195 high-altitude low-noise propeller can increase the maximum flight height of Matrice 300 RTK, so it is recommended for operation on high altitudes.

    Tips

    Note: Using the high altitude propeller will reduce the service life of the motor.

    In The Box

    CCW propeller × 1

    CW propeller × 1

    Screw × 6

    Specifications

    Propeller Diameter: 21 inches

    Pitch: 9.5 inches

    Compatibility

    Matrice 300 RTK

  • DJI Matrice 300 Series 4G Dongle ZTE MF833V

    Price on application

    4G Dongle for DJI Matrice 300 RTK

    ZTE MF833v is a 4G LTE Category 4 USB Stick which could achieve download speed up to 150Mbps and upload speed to 50Mbps.

  • Matrice 300 Series BS60 Intelligent Battery Station

    Price on application
    Overview

    Portable and easy to use, the BS60 battery station can be used to charge, store, and transport batteries. It can charge four drone batteries and four controller batteries at a time, allowing seamlessly shift changing during operation. Designed like a trolley case, it can be conveniently carried. A 220-240 V power source is required for the battery station. It needs approximately 60 minutes to fully charge two TB60 intelligent flight batteries, and 30 minutes to charging them to 20% ~ 90% of the capacity.

    Tips

    The battery station is applicable only to TB60 intelligent flight batteries and WB37 intelligent batteries. So do not use it to charge other batteries.

    In The Box

    Battery station × 1

    Power cable × 1

    Specifications

    Dimensions: 510×403×252 mm

    Weight without battery: 8.37 kg (18 lbs)

    Maximum Load: 12 kg (26 lbs)

    Charging Time:

    100-120 V, 70 mins

    220-240 V, 60 mins

    Maximum Input Power: 1,070 W

    Operating Temperature: -20 ~ +40°C (-68 ~ +104°F)

    Compatibility

    Matrice 300 RTK

  • D-RTK 2 High Precision GNSS Mobile Station

    Price on application
    Overview

    Gain improved relative accuracy with centimeter-level precision positioning data using the D-RTK 2 High Precision GNSS Mobile Station, which supports all major global satellite navigation systems and provides real-time differential corrections.

    Highlights

    Supports: GPS: L1 C/A, L2, L5; BEIDOU: B1, B2, B3; GLONASS: F1, F2; Galileo: E1, E5A, E5B

    Connect multiple drones to conduct coordinated operations

    IP65 Ingress Protection

    In The Box

    D-RTK 2 Body × 1

    Extension Rod × 1

    Charging Hub × 1

    AC Power Adapter × 1

    Intelligent Battery (WB37) × 2

    Battery Cover × 1

    AC Power Cable × 1

    USB-C Cable × 1

    USB-C OTG Cable × 1

    Hex Key × 1

    Specifications

    Simultaneously receives: GPS: L1 C/A, L2, L5; BEIDOU: B1, B2, B3; GLONASS: F1, F2; Galileo: E1, E5A, E5B

    Positioning Accuracy:

    Single Point

    Horizontal: 1.5 m(RMS)

    Vertical: 3.0 m(RMS)

    RTK

    Horizontal: 1 cm+ 1 ppm(RMS)

    Vertical: 2 cm+ 1 ppm(RMS)

    1 ppm: For every 1 km increase in distance, the accuracy will be 1 mm less. For example, the horizontal accuracy is 1.1 cm when the receiving end is 1 km away from the base station.

    Ingress Protection Rating: IP65

    Operating Temperature: -20° to 55° C (4° to 131° F )

    Compatibility

    Matrice 300 RTK

    Phantom 4 RTK

  • DJI Matrice 300 RTK

    Price on application

    DJI MATRICE 300 RTK

    55 min Max Flight Time, 23 m/s Max Flight Speed
    15 km Transmission Range, 1080p Triple-channel Video
    Supports up to 3 payloads, 2.7 kg maximum payload capacity
    Automate inspections with Live Mission Recording and AI Spot Check
    Advanced algorithms enable PinPoint and Smart Track to obtain dynamic location information for subjects in view
    6 Directional Sensing and Positioning system enhances flight safety
    Password-protected access to aircraft and data
    AirSense ADS-B Receiver warns of nearby airplanes and helicopters
    Secure data transmission with AES-256 encryption
    DJI Pilot with Local Data Mode protects drone data
    Operating Temperature: -20°C to 50°C

     

mini 2

mavic air 2

air 2s

dji fpv

mavic 2

dji phantom

dji inspire 2

dji enterprise

ryze tech tello

sd cards

approved used

Browse Categories

mini 2

mavic air 2

air 2s

mavic 2

dji inspire 2

ryze tech tello

sd cards

approved used

dji fpv